Fertilizing and Watering
  
           | 
        
        
          
            Subject:  spreading borax on patch
			
  
           | 
        
        
          | 
            
           | 
        
        
          | 
             From 
           | 
          
             Location 
           | 
          
             Message 
           | 
          
             Date Posted 
           | 
        
		
            | ZAPPA | 
            
               Western PA 
             | 
            
               How do you all spread a rather small amount of borax, say 26 onces, over a patch the size of 4800 sq. ft ?
  The borax is so light that if you try to spread by hand, half of it blows away in the wind. Last year I saw that Ron Wallace puts smaller textured stuff in with his coarser stuff when he is pushing his spreader.  I wonder if that would work with the borax also ?? 
		
				
             | 
            
               4/21/2017 11:04:37 AM 
             | 
          
		
            | frostbite | 
            
               I. Falls, Minn 
             | 
            
               I would like to also know. I need a very small amount.  I was planning on dissolving it in water and spraying it.  Will this work? 
		
				
             | 
            
               4/21/2017 11:28:43 AM 
             | 
          
		
            | Andy W | 
            
               Western NY 
             | 
            
               I thoroughly mixed it up with worm castings.  Much easier to spread a 5 gallon bucket or two of castings mix (or something similar) that a tiny amount of something.
  Best option is probably to dissolve in water and spray it on, I would think there's better ability to get even coverage that way. 
		
				
             | 
            
               4/21/2017 11:45:19 AM 
             | 
          
		
            | ZAPPA | 
            
               Western PA 
             | 
            
               Thanks Andy, I have a hose end fertilizer that should work.  
		
				
             | 
            
               4/21/2017 12:44:13 PM 
             | 
          
		
            | WiZZy | 
            
               Little-TON - Colorado 
             | 
            
               I like to spray water on alfalfa pellets a bit and coat them, then spread the pellets with a chest broadcaster.  I have to do the same with my powdered Mn as well.  I have coated Rye seeds with Azo's for spreading in the same manner. 
		
				
             | 
            
               4/21/2017 12:48:42 PM 
             | 
          
		
            | cojoe | 
            
               Colorado 
             | 
            
               I spread boron,copper by mixing it with humic acid granules and kelp meal.Mixed it in a wheel barrel with some water as a sticker. 
		
				
             | 
            
               4/21/2017 1:02:28 PM 
             | 
          
		
            | Iowegian | 
            
               Anamosa, IA  [email protected] 
             | 
            
               I mix it real well with kelp meal and epsom salt. Sometimes add copper and manganese if needed.  Spread it with rotary spreader on calm day. Kelp blows around very easily.
  
		
				
             | 
            
               4/21/2017 1:33:36 PM 
             | 
          
		
            | Jay Yohe | 
            
               Pittsburgh, PA 
             | 
            
               Ron W suggested I mix borax with kmag and then spread on patch.  
		
				
             | 
            
               4/21/2017 2:06:17 PM 
             | 
          
		
            | So.Cal.Grower | 
            
               Torrance, Ca. 
             | 
            
               I've always done what Zappa does. You can spread it evenly across the patch. Warm water, a good amount of stirring then spray. 
		
				
             | 
            
               4/21/2017 3:10:49 PM 
             | 
          
		
            | Ron W. | 
            
               Coventry RI USA 
             | 
            
               Always mix a small amount in with a big amount.  I add kelp meal or K mag to wheel barrel, then add Borax, mix with shovel and add to spreader.   
		
				
             | 
            
               4/21/2017 5:19:40 PM 
             | 
          
		
            | ZAPPA | 
            
               Western PA 
             | 
            
               Great responses, thanks all !
  
		
				
             | 
            
               4/21/2017 8:39:26 PM 
             | 
          
		
            | cucurmel | 
            
               Bavaria, Eurafrasia 
             | 
            
               Just spray foliar fertilizer B with Ca to apply it more precisely with such nozzles: https://www.google.de/search?q=zangendüse&client=tablet-android-samsung&prmd=mivn&source=lnms&tbm=isch&sa=X&ved=0ahUKEwiLxrCYr8TTAhVGFMAKHWkGD4oQ_AUICigC&biw=1280&bih=800#imgrc=WrRCuBz5wGbFkM: 
		
				
             | 
            
               4/27/2017 5:54:18 AM 
             | 
          
		
        
          | Total Posts: 12 | 
          Current Server Time: 11/4/2025 8:32:06 AM |